1996 Nissan 240sx - Power Pages
Dyno Notes
We lost power when grounding the wires near the distributor. We fixed the problem and found horsepower by re-routing the wires and regrounding near the valve cover, away from the distributor.
| 2000 to 3500 HP: 1 to 5 | 2000 to 3500 TQ: 2 to 8 lb-ft |
| 3500 to 5500 HP: 5 to 6 | 3500 to 5500 TQ: 6 to 8 lb-ft |
| 5500 to Redline HP: 6 to 8 | 5500 to Redline TQ: 5 to 8 lb-ft |
| Peak Horsepower: 132.5 | Peak Torque: 139.6 lb-ft |
Part Includes
Wires and all necessary connectors
Pros
Easy install with all necessary parts, including battery terminal bracket, to complete install within an hour or less. And no, it's not a gimmick!
Cons
Finding good grounding points away from any electrical components can be time consuming, but beneficial if you're looking for easy horsepower.
InstalL time: 30 - 45 minutes
Tools Required For Installation10mm socket, 12mm sockets and ratchet, 10mm wrench, extension
DYNO 2 hot shot HeaderHeader air temp @ 62.5 Degrees FahrenheitTemperature difference from previous run: +1 Degree Fahrenheit
| Peak HP | 139.0 |
| Peak TQ | 148.6 |
...
>>next page